Product Family

LFP 5-10kWh LV Series

Low-voltage wall-mounted lithium battery family for residential solar storage, parallel expansion and indoor/outdoor deployment.

Wall-Mounted Battery
51.2V Platform
Residential Storage
Parallel Expansion
Photorealistic wall-mounted residential battery systems in 5 to 10kWh low-voltage range

Wall-Mounted LV

Residential low-voltage battery family

Low-voltage wall-mounted lithium battery family for residential solar storage, parallel expansion and indoor/outdoor deployment.

Highlights

  • Capacity options of 5.12kWh and 10.24kWh
  • Parallel expansion up to 16 units
  • 6000-cycle design with a 10-year warranty target
  • CAN / RS485 communication and IP65 protection

Voltage Platform

51.2V

Capacity Range

5.12kWh to 10.24kWh

Usable Energy

4.6kWh to 9.2kWh

Parallel Units

Up to 16

Cycle Life

6000 cycles

Protection

IP65

Source and Boundary

Product information requires final model confirmation

LFP 5-10kWh / LV rechargeable lithium battery datasheet

The 51.2V platform, 5.12/10.24kWh nominal capacity, IP65 rating, CAN / RS485 interfaces and 16-unit expansion limit are taken from the product datasheet.

Confirm inverter compatibility, applicable certification package and shipment configuration for the destination market.

Download Battery Datasheet

Product datasheet covering both wall-mounted capacity variants.

LFP 5-10kWh low-voltage wall battery datasheet preview
Datasheet preview for the low-voltage wall-mounted battery family.

Selection Direction

Match the product family to your requirement

Documented product directions are shown below. Final model, compatibility, document scope and supply terms are confirmed with your project inquiry.

Application

Smaller home backup requirement

Product Direction

LFP 5kWh / LV - 5.12kWh nominal, 4.6kWh usable

Confirm Before Quote

Critical load power, backup duration and compatible inverter

Application

Higher residential self-consumption or backup

Product Direction

LFP 10kWh / LV - 10.24kWh nominal, 9.2kWh usable

Confirm Before Quote

Daily consumption, installation position and discharge requirement

Application

Expandable low-voltage storage

Product Direction

Parallel configuration up to 16 units

Confirm Before Quote

Inverter support, communication layout, protection and shipment scope

Quotation Input

Information required for model confirmation

Provide the available project details so Rongkai can confirm product suitability, applicable documentation and quotation scope.

Request Product Quote
  • Required usable energy and expected backup duration
  • Hybrid inverter model and 51.2V compatibility
  • Indoor or outdoor installation requirement
  • Number of batteries or future expansion plan
  • Destination-market transport and compliance document needs

Application Fit

Application areas covered by this product family, subject to final model and system compatibility confirmation.

Residential solar storage

Backup power systems

Indoor and outdoor installation

Hybrid inverter matching

Model Matrix

Compare the main variants available within this family.

LFP 5kWh / LV

Compact residential storage option

LFP 10kWh / LV

Higher-capacity wall-mounted option

Selection Guide

Key points for model comparison, system matching and quotation preparation.

Best Fit

A residential low-voltage battery family aimed at home solar storage and modular expansion.

System Match

Best matched with residential hybrid inverter systems where wall-mounted installation and simple expansion matter.

Selection Parameters

Capacity, voltage platform, cycle life, communication and protection level define the battery configuration.

Request LFP 5-10kWh LV Series

Send your destination market, capacity requirement, installation context and any document requirements for model confirmation and quotation.

LFP 5-10kWh LV Series | battery SOLAR